Monster Paint Traction Spray 12oz
Monster Paint Clear Spray-On Traction for Stand Up Paddle Boards is Ultra-Lite, Super Clear and provides Nose Riding Grip. It is Spray-On SUP Traction that gives you the grip and the looks you are looking for.
Surface Coverage: 1 spray can will coat 2 Boards and 2 Paddles
MONSTER PAINT SUP TRACTION IS A CLEAN CLEAR SPRAY TRACTION THAT LASTS!
*Where can I use Monster Paint Traction?
Use Monster Paint Traction for “Nose Riding” on Longboards, SUP Board and the Paddle Shaft for “Hand Grip”. For Sailboard, Kiteboard, Wakesurfing, Towboard, Skimboard and Skateboards. Use on Shortboards as a wax base coat for killer wax bumps and “Hand Grip” for unreal big air tricks.
*How many boards will 1 Spray Can of Monster Paint Traction cover?
Surface coverage (using 3 coats each) is 3 Boards or 2 boards and 2 paddles.
*What surfaces can I apply Monster Paint Traction?
Epoxy, Fiberglass, Gloss Coat and Sand Finish, Gelcoat, Wood, Carbon Fiber, Aluminum, and most other surfaces.
*How do I apply Monster Paint Traction?
Clean surface of all dirt, wax, oil, etc. Spray from a distance of 18″ inches using smooth even strokes. Apply 3 lite coats to build up the clear texture for long lasting traction. For more details see directions on back of the can.
*How do I clean the surface area prior to appling Monster Paint Traction?
Prep the surface using a Surf Wax Remover or lacquer thinner, and paper towels. All wax, oil, and dirt must be removed to insure proper adhesion.
*What is the minimum temperature I can apply Monster Paint Traction?
Apply when the temperature is 50*F (12*C) minimum, 90*F (32*C) maximum.
*How long does it take to dry?
Dry to the touch in 1 hour. Hard Cure time @ 77*F is 18 hours, Overnight cure is recommended.
*What’s the best way to keep Monster Paint Traction clean?
Clean Monster Paint Traction with dish soap and water. Scrub with a kitchen brush and rinse soap off thoroughly with clean water.
*What can I do to remove Surf Wax from Monster Paint Traction?
Use a citrus based Surf Wax Remover. It will remove the wax but not the Monster Paint Traction.
*How long will Monster Paint Traction last?
A 3-coat appliction cleaned and applied properly, allowed 18 hours or more cure time will last for 8 months or more before a touch-up coat is needed.
*How can I remove Monster Paint Traction competely from my board?
To remove Monster Paint Traction from the surface of your boards deck or paddle shaft use a Lacquer Thinner, or fine sand paper.